Interlogix NS3503-16P-4C страница 122 Скачать руководство пользователя

Страница: 122 / 316

NS3503-16P-4C User Manual

120

Port -6 & 7= Tagged,

Port-1~3 = Excluded.

4.6 Spanning Tree Protocol

4.6.1 Theory

The Spanning Tree Protocol can be used to detect and disable network loops, and to provide backup

links between switches, bridges or routers. This allows the switch to interact with other bridging devices

in your network to ensure that only one route exists between any two stations on the network, and

provide backup links which automatically take over when a primary link goes down. The spanning tree

algorithms supported by this switch include these versions:



STP – Spanning Tree Protocol (IEEE 802.1D)



RSTP – Rapid Spanning Tree Protocol (IEEE 802.1w)



MSTP – Multiple Spanning Tree Protocol (IEEE 802.1s)

The IEEE 802.1D Spanning Tree Protocol and IEEE 802.1w Rapid Spanning Tree Protocol allow for the

blocking of links between switches that form loops within the network. When multiple links between

switches are detected, a primary link is established. Duplicated links are blocked from use and become

standby links. The protocol allows for the duplicate links to be used in the event of a failure of the primary

link. Once the Spanning Tree Protocol is configured and enabled, primary links are established and

duplicated links are blocked automatically. The reactivation of the blocked links (at the time of a primary

link failure) is also accomplished automatically without operator intervention.

This automatic network reconfiguration provides maximum uptime to network users. However, the

concepts of the Spanning Tree Algorithm and protocol are a complicated and complex subject and must

be fully researched and understood. It is possible to cause serious degradation of the performance of the

network if the Spanning Tree is incorrectly configured. Please read the following before making any

changes from the default values.

The Switch STP performs the following functions:



Creates a single spanning tree from any combination of switching or bridging elements.



Creates multiple spanning trees – from any combination of ports contained within a single switch, in

user specified groups.

Содержание NS3503-16P-4C





























































































































































































































































































































Результаты поиска

Содержание NS3503-16P-4C

Отзывы:

Похожие инструкции для NS3503-16P-4C

Бренды по названию

Популярные бренды

Interlogix NS3503-16P-4C, Руководство пользователя

Результаты поиска

Содержание NS3503-16P-4C

Отзывы:

Похожие инструкции для NS3503-16P-4C

Бренды по названию

Популярные бренды