Ethernet Interface Installation Instructions
Product summary
The Ethernet Interface module (60-938) is an Ethernet module
designed to provide an additional reporting method for Simon
panels. The module connects to a DSL or cable modem
(broadband) and reports events to the premisesconnect.com
web site and up to two Osborne-Hoffman (OH2000E) network
receivers.
Premisesconnect.com is used by:
•
Installers - to aid in installation and maintenance of
security systems.
•
Dealers - to simplify customer and account management.
•
Customers - to receive event notifications and to control
their security system.
Ethernet Interface Module Setup
Perform the following steps to setup the Ethernet Interface
module. Each step is described in detail in this manual.
1. Installation - Installing the Ethernet Interface module into
the Simon
®
control panel.
2. Activation - Activating the communication channel
between the module and the Simon panel.
3. Connection - Connecting the Ethernet Interface Module -
Simon Panel combination to a network.
4. Registration - Registering the system on the
premisesconnect.com website.
Note
: Dealers are required to have a contract with UTC Fire &
Security before accessing the premisesconnect.com web site.
Upon entering into a contract, the dealer is supplied with a
Dealer ID, which is required for system registration on the web
site.
Installation
Requirements
•
Broadband Internet connection (DSL or cable modem)
•
An available 10-Base-T or 10/100-Base-T Ethernet Port
•
Simon panel with software version 4.0 or later
Tools and Supplies
•
Small blade and Phillips screwdriver
•
Screws for mounting module
•
Standard (non-crossover) Category 5e Ethernet cable with
RJ45 connectors
• Power/Bus
cable
Mounting and Wiring
Figure 1: Mounting the Ethernet Interface Module
Pins
Battery
Connection
To mount the Ethernet Interface module inside a
Simon panel:
1. Remove AC power.
P/N 466-2161 • REV D • January 2011
1
