TruVision HD-TVI Series 4 PTZ Dome Camera Configuration Manual
3
Programming
Once the camera hardware has been installed, the camera can be configured
using a HD-TVI DVR menu.
You can also configure the camera settings via a DVR. Select the PTZ protocol
TruVision Coax
and click the menu button to call up the menu.
Call up the camera OSD menu
To set up the camera:
1. Set up the camera hardware as described in the installation manual.
2. Under
Camera Settings
of the DVR, access the PTZ menu and set the
protocol for the TruVision HD-TVI camera to
TruVision-Coax
.
Note
: The TruVision-Coax protocol will always be enabled.
3. In live view of the desired camera, click the PTZ Control icon on the live view
toolbar to access the PTZ control panel.
4. To call up the camera setup menu:
From the camera, press the
Menu
button (if present).
— or —
From the local live view of the DVR, select
Menu
from the PTZ control panel
or call
Preset 95
.
— or —
From the remote live view of the DVR, call
Preset 95
.
The camera setup menu appears (see “Menu tree” on page 4 for the menu
structure).
5. Select the menu options:
From the DVR
: To select an OSD item, click the directional buttons up/down.
To adjust the value of a selected item, click the directional buttons left/right.
From the camera (if it has a Menu button)
: To select an OSD item, push
the Menu button up/down. To adjust the value of a selected item, push the
Menu button left/right.
6. Click
Iris+
to enter the submenu or to confirm the selected item.
7. When the setup is complete, select
Exit
and click
Iris+
to exit the camera
OSD.
Note
: You cannot exit the camera setup menu using the Menu button on the
camera.
