16
TruVision HD-TVI Series 4 PTZ Dome Camera Configuration Manual
Note
: Occasionally portions of the masked area may be visible when quick pan-
tilt-zoom commands are executed. It is recommended that privacy mask regions
are configured to extend past the boundaries of the protected area to avoid
inadvertent exposure.
MASK NO.
The privacy mask number, which ranges from 1 to 24.
MASK STATUS
ON
: Enable the privacy mask function.
OFF
: Disable the privacy mask function.
SET MASK
Click this menu option to enter the editing mode (see below).
ADJUST MASK POS
FOCUS SHIFT STATUS
SAVE : OPEN
QUIT : CLOSE
ADJUST MASK POS
: Use this function to position the mask on
screen. Click the directional buttons to move the privacy mask to the
desired area. Click the
FOCUS+
button to call up the
ADJUST MASK
SIZE
message on screen. Click the up/down buttons to
increase/decrease the height of the mask and click right/left buttons
to increase/decrease the width of the mask.
Note:
The tilt range to configure privacy masks is between 0° and
70°.
SAVE
: Click to save changes and return to the previous menu. The
masked area turns gray. To modify the mask, click
IRIS+
to enter the
SET MASK
menu. Click
IRIS+
button again to edit.
QUIT
: Cancel.
CLEAR MASK
Delete all privacy masks.
Alarm Input
You can configure the PTZ dome to respond to alarm events with alarm linked
actions, such as calling presets, preset tours, shadow tours, scanning, etc.
