http://www.tyan.com
68
Password has been installed. You may then select the User Security
option and enter a password for the user.
You can enter a new User password at any time simply by selecting the
User Security option, and typing in a new password. To enter a new
Supervisor password, select the Supervisor Security option. You will be
asked to enter the current password. After you do so, you will be
prompted to enter the new password.
In either the Supervisor or User Security options, pressing <Enter> once
when asked for a new password, and a second time when asked to
confirm the new password, will uninstall the existing password. Note
that uninstalling the Supervisor password uninstalls the User password
as well.
Anti-Virus Security
If Enabled, the virus protection program helps you monitor your system
for viruses. During and after the system boot up, any attempt to write
to the boot sector or the partition table of the hard disk drive will halt
the system and produce an error message. If a warning appears, you
should run an anti-virus program to locate the problem. This feature
protects only the boot sector, not the entire drive. Note that some disk
diagnostic programs will trigger a virus warning message.
Chapter 4
BIOS Configuration
Virus Protection
Disabled
Enabled
