http://www.tyan.com
13
Next, connect your IDE cables (if you’re using IDE hard drives).
The colored stripe on the cable should face toward the top of your
chassis, or toward the big white B printed on the motherboard.
In Figure 3 you can see
how the IDE cables
should look when they
are connected to your
hard drive. Notice how
Pin 1 (denoted by a red
stripe) is connected so
that it is next to the
power connector of the
drive. In most cases,
this is the proper way of
connecting your IDE
cable to the hard drive.
Figure 4 shows the IDE
cable properly con-
nected to the
motherboard.
INST
ALL
Figure 3
Figure 4
Pin 1
