background image

WEIGHT LIMITATION 

WARNING - Do not use this bed if weight limitation is exceeded. 

The weight limitations for adjustable beds (while taking into consideration user’s size, proper positioning, realignment, 

transfer, and overall care) are: Twin Size – 350 pounds*; Full and Queen Size – 450 pounds*. *Determined with weight 

distributed evenly over the entire bed surface. 

ELECTRICAL – GROUNDING INSTRUCTIONS: 

A.

This product 

MUST

 be grounded. In the event of an electrical short circuit, grounding reduces the risk of 

electrical shock by providing an escape wire for the electrical current. This product is equipped with a cord having a 
grounding wire with a grounding plug.  The plug must be plugged into an outlet that is property installed and grounded.

DO NOT

 bypass the grounding plug. 

B.

FOR 115 VAC CIRCUITS ONLY:

  Products ordered for use on a 115 VAC circuit must have a grounding plug 

that looks like the plug illustrated in Figure A, shown at the bottom of this page. A temporary adapter, which looks like
the adapter illustrated in Figures B and C, may be used to connect this plug to a 2-pole outlet as shown in Sketch C if a 
properly  grounded outlet is not available. The temporary adapter should be used only until a qualified electrician can 
install a properly grounded outlet (see Figure D). The rigid ear, extending from the adapter MUST be connected to a
permanent ground such as properly grounded outlet box cover. Whenever the adapter is used, it MUST be held in place 
by the screw. 

C.

FOR 220 VAC CIRCUITS ONLY:

  Products ordered for use on a 220 VAC must have a grounding plug that 

looks like the plug illustrated in Figure E, shown at the bottom of this page. This plug is a European type CEE 7/7 and 
must be grounded in accordance with local electrical codes. A temporary adapter may be used until a qualified electrician 
can install a properly grounded plug as long as the above grounding requirements are met. 

NEVER operate if the unit has a damaged cord or plug.  If it is not working  properly, call a Qualified 
Service Personnel for examination and repair. 
Keep all cords away from HEATED or HOT surfaces such as space heaters or heating ducts. 

Содержание Gold series




















Отзывы: