Interflex Gold series, Руководство владельца по сборке и эксплуатации

Страница: 15 / 19

Wire less Remote Channel Setup
:
1.
Operating more than one adjustable power base in close proximity of each other will require you to perform a channel setup
function.
2.
Remove the batteries from each hand control and disconnect the AC power.
3.
Plug one base into a surge protected AC power supply.
4.
Re-install the supplied “AA” batteries.
5.
Hold both the “head up” and “foot up” buttons simultaneously until the LCD displays all eights (see figure 1 below) and
release the buttons.
Figure l.
6. The LCD will display a “C” and search for a channel, after about 30 seconds a number will be displayed , push up or down on
the foot massage button for the desired channel and push the “set” button on the hand control.
7. Repeat the steps above for the additional base keeping in mind the selected channel should be a different number from the first
base; you should have both base operating independent of each other, if you desire both bases to operate together please refer
to pages 8, 10 of the owner’s manual.