16 Ga. Wide Crown Stapler
Drives 15/16" Crown Staples (5/8" to 2" / 16 to 50mm)
Model No. SGSW5016
Item No. 64415
13
Interchange Brands
Operator’s Manual
CONNECTIONS
Fittings
Install a female coupler to the hose . The female coupler
will connect to the quick release that fits the tool .
Filter-Regulator-Lubricator
Never connect tool to pressure that potentially exceeds
150 psi or 10 .34 bar .
Filter-regulator-lubricator units supply an optimum
condition for the tool and extend the tool life . These units
should always be used .
Filter
The filter removes moisture and dirt mixed in compressed
air .
Keep the filter clean by maintaining tool regularly .
Drain daily .
Regulator
The regulator controls the operating pressure for safe
operation of the tool .
Inspect the regulator before operation to be sure it
operates properly .
Use a regulator with a pressure range of 0 - 110 psi .
Lubricator
The lubricator supplies an oil mist to the tool .
Inspect the lubricator before operation to be sure the
supply of lubricant is adequate .
If an inline lubricator is not available, supply 3 to 5 drops
of INTERCHANGE pneumatic tool lubricant into the air
plug on the tool twice a day .
Air Hose
Air hose must be professional grade and have a minimum
working pressure rating of 150 psi ﹙10 .3 bar﹚ or 150%
of the maximum pressure produced in the system,
whichever is higher .
1
1
2
2
3
3
OpERATING THE TOOL
