Interacoustics AT235, Инструкция по эксплуатации

Страница: 22 / 60

D-0128073-C – 2022/05
AT235 - Instructions for Use - US Page 18
2.15 Use of standard and clinical probe system
For establishing most stable measurements, it is recommended not to hold the probe between fingers during
the measurements. Particularly acoustic reflex measurements could be affected by probe movements.
2.16 AT235 Stand-alone operation
2.16.1 AT235 Stand-alone operation panel
Name Description
1 ON Turns the AT235 ON and OFF.
2 Shift Shift is used to access secondary functions of the other keys.
3 Setup Hold down Setup and use the wheel (19) to select the desired
Setup menu then let go of the Setup button to open it.
4-13 Function keys The 10 function keys hold functions of which labels are displayed
in the screen.
14 Tests Hold down Test and use the wheel (19) to select the desired
protocol or audiometry or impedance module. Let go of the Test
button to make your selection.
15 New Session Clears data and starts a new session in the current module.
16 Clients Press the Clients button to open a window in which a client can
be selected, edited, or created. Also, its historic sessions can be
viewed.
17 Save Saves the current session for the current module.
18 Print Prints the session that is currently on screen.
19 Wheel Used for manual pump control as well as scrolling through menus
and selection possibilities. In the audiometry module the wheel
controls the stimulus intensity.
20 Tymp Selects or deselects a tympanogram test from the protocol.