Inter-Tel Axxess 8500 Скачать руководство пользователя страница 47

Страница: 47 / 108

Inter-Tel

Model 8500 User Guide

GETT

ING ST

ART

Recording and Sending Voice Mail Messages

You can record and send voice mail messages by accessing the record option on the
main menu.

NOTE:

If E-Mail Reader is enabled for your mailbox, a reply to an e-mail message (see

page 73

) is a recorded voice message that is attached to the e-mail as a

.wav

file.

To record and send voice mail messages:

Access your mailbox as described on

page 30

Say “Record” or press

Say or enter the desired mailbox number or group list number. The system
announces the name assigned to the mailbox number or group list number. You
have the following options:

•

Say “Yes” or press

to accept the subscriber’s name.

•

Say “No” or press

to start over.

Record your message after the tone. While recording, you have the following
options:

•

Press

to pause while recording. (Say “Continue” or press

to con-

tinue.)

•

Press

to erase and re-record your message.

When finished recording, you can press

to access the following options:

NOTE:

If you select the copy or special delivery options and then do not respond

to the prompts, the system will time out and deliver your message to the original
recipient.

•

Say “Send” or press

to send the message and return to the voice mail

options.

•

Say “Cancel” or press

to cancel the recording.

•

Say “Replay” or press

to replay your message.

•

Say “Append” or press

to add to your message.

•

Say “Erase” or press

to erase and re-record your message.

•

Say “Copy” or press

to copy your message to other mailboxes.

NOTE:

If you are not using an Enterprise Messaging (EM) voice mail sys-

tem, you can send the message to additional mailboxes from the “Special
Delivery Options” menu

after

sending the message to the first recipient (see

page 36

Содержание Axxess 8500













































































































Результаты поиска

Содержание Axxess 8500

Отзывы:

Бренды по названию

Популярные бренды

Inter-Tel Axxess 8500, Руководство пользователя

Результаты поиска

Содержание Axxess 8500

Отзывы:

Бренды по названию

Популярные бренды