background image

25

Inter-Tel

®

 Model 8500 User Guide

GETT

ING ST

ART

E

D

Redirect Call

The Redirect Call feature allows you to forward any call that is ringing on your end-
point without having to answer the call.

NOTE: 

You cannot redirect calls to an extension that is in DND or to a restricted out-

side number.

To redirect a call to an extension number:

1.

Press 

 and dial 

 

 

.

2. 

Dial the extension number.

To redirect a call to an outside telephone number:

1.

Press 

 and dial 

 

 

.

2. 

Enter the outside telephone number.

3. 

Press 

.

R

EDIALING

 

A

 N

UMBER

The redial feature allows you to redial the last outside number you dialed. Although
most endpoints redial the last number 

dialed

, your system administrator can program

your endpoint to redial the last number 

saved

To use the Last Number Dialed feature (if enabled):

With or without the handset lifted, press 

. A line is selected automatically, and

the number is dialed.

To use the Last Number Saved feature (if enabled):

 •

To save the last number dialed:

 

While the endpoint is idle or while listening to

intercom dial tone, press 

.

 •

To redial the saved number:

 

After selecting a line, press 

. The number is

dialed automatically.

3

3

1

3

3

1

#

REDIAL

REDIAL

REDIAL

Содержание Axxess 8500













































































































Отзывы: