Inter-m PW-642, Руководство по эксплуатации

Страница: 8 / 22

PROGRAM TIMER
6
PW-642
Rear Panel
Rear Panel
1. AC CONNECTOR AND FUSE HOLDER
Connect the supplied standard AC input cable to this input. The fuse holder below the input contains the AC
overload protection fuse. If the fuse has blown out, replace it with a fuse of the same type and rating. If the
fuse continues to blow, refer servicing to a qualified service technician.
2. AC POWER OUTLET 1
This provides up to 500W as switched AC mains source for an external device.
The shape of outlets can be different according to country requirements.
3. AC POWER OUTLET 2
This provides up to 30W as switched AC mains source for an external device.
The shape of outlets can be different according to country requirements.
4. VOICE INPUT CONNECTOR
This connection is intended to receive signal from the output of the Inter-M PV-632 (Multi Voice file).
5. CHANNEL INPUT (1-4)
These are the input connectors for channels 1 through 4.
6. DC INPUT TERMINALS
This is an entry terminal of DC +24V power to operate this unit by connecting to DC power. Before
connection, ensure to check voltage and the (+), (-)polarity.
7. REMOTE CONTROL PORT (REMOTE OUTPUT)
This provides remote control of the AC OUTLETS when used in conjunction with the Inter-M PD-659 or
ECS-616.
1 2 3 4 5
6 7 8 9
REMOTE OUTPUT RC-232C