Inter-m PMC-6208, Руководство по эксплуатации

Страница: 9 / 20

PROGRAM MANUAL CONTROLLER
7
PMC-6208
Operation
Operation
AUDIO MATRIX SETUP AND CONTROL
1. MODE SETTING
- From the main screen, press the arrow buttons to navigate and select <Mode>, and press ENTER key.
- Choose the desired operation mode, PC, PMC or Auto Mode.
- PC mode: Select this mode to control the system only by PC Software
- PMC mode: Select this mode to control the system only by the PMC. This mode is used when there is no PC
is connected to the system and offers manual stand-alone control via the PMC-6208 only.
- Auto mode: Use this mode as a redundant/fail-safe operation mode. The primary mode of operation will
by the PC and software. When both the controller/server PC and PMC-6208 are installed in tandem in a
6000 PA system, the PMC-6208 will automatically take control of the PA system when a PC failure is
detected.
2. SETTING THE INPUT VOLUME
- From the main screen, press the arrow buttons to navigate and select <InVol>, and press ENTER key.
- Move the cursor to the desired channel (EP, Timer, RM1~4, CH1~10), and set the desired volume using the
Rotary Dial Switch.
- When finished, press MENU or ESC button to return to the main menu.
InVol OutVol EQ Sel Ver Set
PC
AUTO AUTO
PMC
Mode Mode
Program Manual Controller
IN-CH
01
- 2
dB
0
EP TI R1 R2 R3 R4 1 2 3 4 5 6 7 8 9 10
20
40
80
60
100