PUBLIC ADDRESS AMPLIFIER
16
PCT-610/620
1. MIC PRIORITY (CH1,CH2)
Turn the volume,
to choose ‘SET MIC1(MIC2) MUTE LVL’, Press ENTER, .
Choose MIN, MID, or MAX with the volume , Press ENTER, .
- MIN : Attenuate level of the other channels by -6dB.
- MID : Attenuate level of the other channels by -12dB.
- MAX: Mute the other channels.
To use the MIC Priority function, press the MIC Priority Switch on the rear panel
2. TEL-IN LEVEL
You can adjust the TEL-IN level. Turn the volume,
to choose 'TEL-IN LEVEL', Press ENTER, .
(VOL: 0(MIN) ~ 31(MAX), DEFAULT: MAX)
3. CHIME LEVEL
You can adjust the chime level. Turn the volume,
to choose 'CHIME LEVEL', Press ENTER, .
Adjust the level with the volume .
(VOL: 0(MIN) ~ 31(MAX), DEFAULT: MAX)
4. BEEP SOUND
Beep sound when you press a button on the front panel.
You can set it on or off. Turn the volume,
to choose 'BEEP SOUND', Press ENTER, .
Choose ON or OFF, Press ENTER, .
- ON: Beep sound.
- OFF: Beep does not sound.
5. IR REMOCON
You can set the IR Remocon function on or off. Turn the volume,
to choose 'IR REMOCON', Press ENTER, .
Choose ON or OFF, Press ENTER, .
- ON: Enable the IR Remocon function.
- OFF: Disable the IR Remocon function.
6. REMOTE CHIME ON/OFF FUNCTION
The chime from the RM-05A can be enabled or disabled by this setup. Turn the volume,
to choose 'RM
CHIME', Press ENTER, . Choose ON or OFF, Press ENTER, .
- ON : Enable the RM Chime. When you press the TALK switch in the RM-05A, the chime sound and then you
can use the RM MIC.
- OFF : Disable the RM Chime. When you press the TALK switch, the chime does not sound, you can use the
RM MIC at once.
When you change the connection of the CHIME ON/OFF switch inside the RM-05A to CHIME OFF
position, then you can not use the RM function with this unit.
If you do not want to use the chime when you use the RM, you can disable the RM Chime in the setup mode.
7. KEY LOCK FUNCTION
All the key inputs except Power button can be locked by the KEY LOCK function.
Turn the volume,
to choose 'KEY LOCK', Press ENTER, . Choose Lock or Unlock, Press ENTER, .
