PUBLIC ADDRESS AMPLIFIER
9
PCT-610/620
2) Remote Control Function
Power ON/OFF, Speaker Select, Volume UP/DOWN, Play/Pause, Stop, Skip, Search, 10 key, Tuning
UP/DOWN, Preset UP/DOWN.
NOTE
: Control Protocol Down Load
Please download the control protocol at the inter-m site, www.inter-m.com support/download folder.
5. RE-05A TERMINAL
The unit can be controlled by RM-05A. Using RM-05A, it is possible to control the speaker zone selection, to
control chime and to make broadcasting at the remote place.
6. EM (EMERGENCY) TERMINALS
When EM switch is connected and pressed in fire or in other emergency cases, EM broadcasting stored in
VOICE IC is outputted. When EM is activated, all the other signals are muted.
7. EXT CHIME
Use these terminals to activate the chime externally.
When the EXT CHIME is selected the ‘CHIME1’, 2 tone chime is activated.
8. EXT MUTE
Use these terminals to mute the signal of the unit externally.
Only EM, RM or Tel-In has priority over the EXT Mute.
9. TEL IN TERMINALS
These terminals can be connected to a telephone exchange system.
When the telephone signal is input, all the other input signals are muted.
10. MUSIC ON HOLD TERMINALS
These terminals output FM music you tuned. These are balanced output.
11. FM ANTENNA
Connect the FM antenna. Please locate the antenna to the position where stations are tuned well.
12. MIC 1/2 PRIORITY
Press these switches to give the priority to channel 1 or channel 2 over all the other channels.
Pin 1: Remote amplifier input signal hot(+)
Pin 8: Remote control 5(Speaker 5)
Pin 2: Remote amplifier input signal cold(–)
Pin 9: Remote control ground
Pin 3: Signal ground
Pin 10: DC +24V
Pin 4: Remote control 1(Speaker 1)
Pin 11: Chime Input
Pin 5: Remote control 2(Speaker 2)
Pin 12: NC
Pin 6: Remote control 3(Speaker 3)
Pin 13: NC
Pin 7: Remote control 4(Speaker 4)
Pin 14, 15: NC
