I N S T A L L A T I O N M A N U A L
W I L D R I D E ™ S L I D E
6
WRS-IM Rev. 7/08 (SBK-INST WRS)
TIP:
Use anti-seize (provided) on all bolts to minimize seizing hardware.
TIP:
Use the box the slide came in to assemble the flume sections and step
sections to keep them from being scratched.
TIP:
Have rag handy to wipe the anti-seize off your finger or you will get it on
the slide and it is difficult to get off.
TIP:
Use vice grips or clamps to hold the flume sections as well as the step
sections together during assembly.
READ THIS ENTIRE INSTALLATION MANUAL
BEFORE ATTEMPTING THE INSTALLATION
For Technical Support or Assistance Contact Customer Service at:
INTER-FAB, INC.
3050 S. ALVERNON WAY
TUCSON, AZ 85713
(800) 737-5386
or visit: www.inter-fab.com
RECOMMENDED TOOLS FOR ASSEMBLY
AND INSTALLATION OF G-FORCE SLIDE:
NOTE: USE PROVIDED ANTI-SEIZE ON ALL BOLTS!
ASSEMBLY TOOLS:
• Socket wrench
• 7/16”, 9/16” & 3/4” sockets and extensions
• 7/16” & 9/16” wrenches
• 5/32” Allen wrench
• Hammer Drill
• 3/8” masonry drill bit (not shown)
• Vice Grips or Clamps (Optional: not shown)
• Step stool/ladder (not shown)
• Center Punch
