intensity BGE-A, Руководство по эксплуатации

Страница: 13 / 14

Check the preset time of timing: press the corresponding
timing button once, then will display the timing time.
Change the timing ON or OFF time: press the corre-
sponding timing button, then reset timing ON or OFF
time.
Cancel the timing: adjust the timing ON or OFF time to
be 0.
Timing the time to be relative time, that relate to the time
which later than the standard time of operating the
remote controller.
Under the remote controller is ON, only can set timing
OFF; under the remote controller is OFF, only can set
timing ON.
6. Precautions
Ș
Ș
Ș
Ș
Ș
Ș
Ș
Ș
Ș
Curtain, door or the like objects will prevent the remote signal
from being received by air conditioner.
Do not get the interior of remote controller wet. It is forbidden
to expose it to direct sunlight or locate it in the place with high
temp.
Malfunction may occur if infrared signal receiver on air condi-
tioner is exposed to sunlight. Please shelter the signal
receiver from sunlight with curtain.
Please remove the nearby electronic device for they may
affect the performance of remote controller.
Do not put the used or different batteries into the remote
controller, otherwise remote controller will fail to send signal.
Please remove the batteries before long period unused, oth-
erwise the remote controller may be damaged.
If pressing the button reset the remote controller, which indi-
cates low battery, please replace the batteries.
If no receiving sound is heard from indoor unit or on
remote controller does not flash, please replace the batteries.
Effective transmitting distance of remote controller is 8m,
please aim the signal sending part to the receiver on air con-
ditioner.
1