intensity BGE-A, Руководство по эксплуатации

Страница: 11 / 14

Auto heat recycling mode function
CAUTION
5.4 Other functions operations only available when the indoor
unit has corresponding functions.
11
Example:
ǻ7LV °C, Ts is 25°C.
when Tf-Ts>=
ˇ
ǻ7LWZLOORSHUDWH&22/PRGHWKHIDQVSHHGZLOOEH
operated according to the setting fan speed.
when Tf-Ts<=
ˉ
ǻ7LWZLOO($7PRGHWKHIDQVSHHGZLOOEH
operated according to the setting fan speed.
Note
:
This function operations only available when the indoor
unit is
in the heat recycling three-pipe system .
When the remote controller selects the auto heat recycling-
mode, the remote controller position must be placed at the signal
receiving range of the air conditioner.
When the remote controller detects changes of the mode(cool
to heat,or heat to cool), it will send the changes to air conditioner.
One beep of air conditioner changed mode signals is giving out.
Function
instruction
ǻ7
˖
Temperature difference, means the different temperature
between the indoor temperature (Tf) detected by the remote
controller and the remote controller setting temperature (Ts).
(the default difference is 3°C, the difference range is 1~4°C)
SW1 definition
Auto Mode (Normal)
SW1
SW1
Auto heat recycling Mode
TEMP
SET
press and buttons for 5S simultaneously,
WKHQHQWHUǻ7VHWWLQJVWDWH
TEMP
SET
ON/OFF
FAN SPEED
ǻ7VHWWLQJVWDWH
press or button
DGMXVWǻ7\RXZDQW
press ON/OFF button
confirm and exit the setting
ǻ7
instruction