45
44
G E O M E T R Y
FLIP CHIP...
CONTINUED
On the drive-side, while holding the back of the shock
with your left hand, loosen the front shock bolt with
a 4mm Allen key
(C)
, then gently push down on rear
shock and lower the shock out of the way. This will
give you access to the shock spacers and Flip Chips.
Slightly tighten the front shock bolt to hold it in place
and to prevent it from hitting the frame.
Remove the left and right upper link spacers
(D).
Upper link spacers have internal O-rings holding
them on to the Flip Chips, they will move once the
static friction is broken. Push out the Flip Chips until
the Chip head clears the rear triangle
(E).
Flip the
Chips into the ‘Low' setting
(F)
by spinning them
around 180°.
C
D
E
F
