43
42
G E O M E T R Y
FLIP CHIP
GEOMETRY ADJUSTMENT
The Primer has a feature called a ‘Flip Chip’ which
allows you to alter the geometry of your bike between
two positions. The bike comes as standard from our
factory in the ‘High’ setting, but if you ride terrain that
is more downhill orientated or you just prefer your bike
to feel slightly more stable on high speed descents
then you may want to put it in the ‘Low’ setting. The
Low setting will slacken the head angle a little, lower
the bottom bracket and standover, shorten the reach
by 5mm and slightly reduce the amount of travel you
have. What position you have the Flip Chip in comes
down to personal preference, riding style and the type
of terrain you normally ride on. Follow the steps below,
or check out the
On the drive-side of the bike use a 5mm Allen key to
loosen and remove the drive-side rear triangle shock
nut
(A)
.
From the non drive-side slide out and remove the
D-Lock shoulder bolt
(B)
.
A
B
