11
3.3.4 Mode
menu
In the system menu, move the cursor to “mode”, and use
『
FOCUS+
』
and
『
FOCUS-
』
to go to
mode menu.
You need to input password when go to system menu, the password is
『
FOCUS +
』
『
FOCUS-
』
『
LENS-
』
『
LENS+
』
『
FOCUS +
』
『
FOCUS-
』
. With the correct password, you will come to the mode
menu shown as Fig.5.
Fig.5
Trigger
『
LENS-
』
and move the cursor, use
『
FOCUS+
』
and
『
FOCUS-
』
to modify the values or
options.
Gain: XXX
Gain value, range: 0~+255;
Bright: XXX
Brightness value, range: -2048~+2048;
Save: XXX
Save configuration setup;
Exit:
Exit configuration setup. Press
『
LENS-
』
button to select the
Exit
option
and press
『
FOCUS +
』
button to exit the menu.
4
Change address
Change address according to steps as follows:
1
、
Change the address of thermal camera (Refer to chapter 3.3.3)
2
、
Change the address of PT system. The address value is address of thermal camera minus 1
(-1) for example: thermal camera address is 2. The PT address is 1 .if thermal camera address
is 3 and PT system address is 2.
3
、
change the visual camera. It must same as the PT system
4
、
change the protocol address. It must same as the PT system
Mode: Gain: Bright: Save: Exit:
