Intellipure 10600-9, Руководство пользователя

Страница: 9 / 12

fig 9
Troubleshooting
1. Unit will not turn on.
a. Check power connection: whether the unit is plugged into a working outlet.
b. Check if the unit’s front cover is in place and snapped shut.
c. Check if the fuse located in the power plug receptacle is blown. (fig 9)
2. The unit turns on but no air blows out.
a. Check if the plastic wrap on main filter or prefilter has been removed.
3. Unit is ON, but no change in speed.
a. Further examination by a trained technician is required.
Call Intellipure Customer Service or local distributor.
4. DFS Indicator is flashing.
a. The main filter needs to be replaced.
See the Maintenance section of this manual for filter replacement instructions.
5. DFS indicator is OFF.
a. Further examination by a trained technician is required.
Call Intellipure Customer Service or local distributor.
9
• Use a pipe cleaner or small vacuum to gently clean the wires on the
high energy grid. (fig 8)
WARNING: IF ALL SUGGESTED STEPS HAVE BEEN TAKEN AND PROBLEMS PERSIST, CONTACT INTELLIPURE CUSTOMER SERVICE
DEPARTMENT OR YOUR LOCAL DISTRIBUTOR FOR FURTHER EXAMINATION BY A TRAINED TECHNICIAN.
fig 6
fig 7
fig 8
WARNING: RISK OF ELECTRIC SHOCK – THESE SERVICING INSTRUCTIONS ARE FOR USE BY QUALIFIED PERSONNEL ONLY. TO REDUCE
THE RISK OF ELECTRIC SHOCK, DO NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE OPERATING INSTRUCTIONS
UNLESS YOU ARE QUALIFIED TO DO SO.