Intellipure 10600-9, Руководство пользователя

Страница: 8 / 12

Routine Care & Maintenance
Filters need to be replaced or maintained properly to maximize the unit’s performance. Maintenance schedule
is based on pollution level. Following is the recommended maintenance schedule for most environments.
Adjust maintenance schedule according to application.
Prefilter - replace every 6 months
High Energy Grid - clean every 3 months
Main filter - replace every 9-12 months
fig 3
fig 4
fig 5
8
Filter Replacement and Maintenance
Replacing the 6-stage Prefilter
• Turn off the unit and unplug from the power outlet.
• Open the front panel, using the side tabs located on the lower panel and pull
towards you, then lift upwards. (fig 3)
• Remove the 6-stage prefilter. The prefilter should be cleaned monthly by using
a small vacuum cleaner and replaced every 6 months. (fig 4)
Replacing the Main Filter
• Remove prefilter.
• Using a screwdriver, remove the 2 screws holding the filter in place. (fig 5)
• Remove and discard the old main filter.
• Slide the new main filter into place. (fig 6) Secure the main filter with the two screws.
• Reinstall the 6-stage prefilter and the front cover. (fig 7)
• Press and hold the POWER button for 5 seconds to reset timer. DFS indicator quickly flashes 3 times
and timer is reset. Timer can be reset when sleep mode is activated and deactivated.
Cleaning the High Energy Grid
• Turn off the unit and unplug from the power outlet.
• Follow the steps of the filter replacement to remove the filters. Replace them if needed.
WARNING: DO NOT USE A WALL OUTLET ADAPTER. DO NOT OPERATE THIS AIR CLEANER WITH
AN EXTENSION CORD. DO NOT OPERATE WITH A DAMAGED CORD OR PLUG.