![Intellinet 524636 Скачать руководство пользователя страница 7](http://html1.mh-extra.com/html/intellinet/524636/524636_user-manual_2074455007.webp)
7
HARDWARE
2. If problems persist or you forget your password, press the button
for longer than 4 seconds and the router will reset itself to the
factory default settings.
NOTE:
Your original configurations will be
replaced with the factory default settings.
• Power adapter jack.
NOTE:
only use the power adapter included
with the Wireless G 4-Port Router, as a different adapter could result
in product damage.
• Not shown is the 2 dB dipole antenna, which is connected to the rear
panel to the left of the RJ-45 ports.
1.3 connecting the router
Before installing the router, connect your PC to the Internet through
your broadband service. (If there is any problem, contact your ISP.)
Then proceed through the following steps.
1. Turn off your PC(s), cable/dSl modem and the router.
2. Adjust the antenna. Normally, upright is a good place to start.
3. Connect the PC(s) and each switch/hub on your local area network
to the lAN ports on the router.
4. Connect the AdSl/dSl/cable modem to the router WAN port.
5. Connect the power adapter between the power socket on the router
and an electrical outlet. The router will start to work automatically.
6. Turn on your PC(s) and the cable/(A)dSl modem.
Shown is a typical setup
for a local area network
(lAN) featuring the
Wireless G 4-Port
Router.