11
QUICK INSTALLATION
ip address:
enter the router’s lAN port IP address (your lAN clients’
default gateway IP address).
subnet Mask:
Specify a subnet mask for your lAN segment.
Click “Next” to proceed to the next screen
.
2.3 wan interface
on this screen, select one of the four types of connections you’ll be
using — Static IP, dHCP Client, PPPoe or PPTP (as explained in the
subsections below) — to connect your router’s WAN port to your ISP.
NOTE:
different Internet service providers require different Internet
connection methods. Check with your ISP as to the type of connection
that is required.
wan access type:
Select one of the four connection options from
the drop-down menu, then click “Next” to proceed to the screen of
the selected connection type.
Static IP
— Your ISP has given you an IP address already.
DHCP Client
— Your ISP will automatically give you an IP address.
PPPoE
— Your ISP requires you to use a Point-to-Point Protocol
over ethernet (PPPoe) connection.
PPTP
— Your ISP requires you to use a Point-to-Point Tunneling
Protocol (PPTP) connection.
