manualshive.com logo in svg

Intellinet 523967, Руководство пользователя

Поделиться
Скачать
Intellinet 523967 Скачать руководство пользователя страница 51

Continuous – The connection will always be kept on. If 
the connection is interrupted, the router will re-connect 
automatically. 

 

Connect On-Demand – Only connect when you want to 
surf the Internet. “Idle Time Out” is set to stop the 
connection when the network traffic is not sending or 
receiving after an idle time. 

 

Manual – After you have selected this option, you will 
see the “Connect” button and “Disconnect” button. 
Click “'Connect” and the router will connect to the 
ISP. If you want to stop the connection, click the 
“Disconnect” button. 

 
Idle Time Out (6):    If you have selected “Connect-On-Demand”, enter 

the idle time out. 

 
Click 'Apply' (3) to save the settings and 'Cancel' to remove the 
information entered. 
 

 

Click 'Continue' to go back to the previous setup menu and to continue 
with the router setup. Click 'Apply' to reboot the router so the settings 
will take effect. Please wait for about 30 seconds while the router is 
rebooting. 

 
 
 
 
 
 
 

Содержание 523967

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды