Intellinet 523967 Скачать руководство пользователя | Manualshive

Страница: 124 / 128

background image

4-3 Glossary

Default Gateway (Router):

Every non-router IP device needs to configure a default

gateway's IP address. When the device sends out an IP packet, if the destination is not
on the same network, the device has to send the packet to its default gateway, which
will then send it out toward the destination.

DHCP:

Dynamic Host Configuration Protocol. This protocol automatically gives

every computer on your home network an IP address.

DNS Server IP Address:

DNS stands for Domain Name System, which allows

Internet servers to have a domain name (such as www.Broadbandrouter.com) and one
or more IP addresses (such as 192.34.45.8). A DNS server keeps a database of
Internet servers and their respective domain names and IP addresses, so that when a
domain name is requested (as in typing "Broadbandrouter.com" into your Internet
browser), the user is sent to the proper IP address. The DNS server IP address used by
the computers on your home network is the location of the DNS server your ISP has
assigned to you.

DSL Modem:

DSL stands for Digital Subscriber Line. A DSL modem uses your

existing phone lines to transmit data at high speeds.

Ethernet:

A standard for computer networks. Ethernet networks are connected by

special cables and hubs, and move data around at up to 10/100 million bits per second
(Mbps).

Idle Timeout:

Idle Timeout is designed so that after there is no traffic to the Internet

for a pre-configured amount of time, the connection will automatically be
disconnected.

IP Address and Network (Subnet) Mask:

IP stands for Internet Protocol. An IP

address consists of a series of four numbers separated by periods, which identifies a
single, unique Internet computer host in an IP network. Example: 192.168.2.1. It
consists of 2 portions: the IP network address, and the host identifier.

The IP address is a 32-bit binary pattern, which can be represented as four cascaded
decimal numbers separated by “.”: aaa.aaa.aaa.aaa, where each “aaa” can be anything
from 000 to 255, or as four cascaded binary numbers separated by “.”:
bbbbbbbb.bbbbbbbb.bbbbbbbb.bbbbbbbb, where each “b” can either be 0 or 1.

«
...
122
123
124
125
126
...
»

Содержание 523967

































































































































Отзывы:

Нет отзывов

Похожие инструкции для 523967

Бренд: Edimax Страницы: 147

Бренд: bintec elmeg Страницы: 66

Бренд: cramZ Страницы: 20

Бренд: Linksys Страницы: 121

ANGLOPACK Comtrend CT-6382T

Бренд: Teleconnect Страницы: 6

Бренд: Rosewill Страницы: 6

Бренд: Digi Страницы: 726

Бренд: Brite View Страницы: 40

RTA 1046VW ADSL1

Бренд: Dynalink Страницы: 5

Wireless LAN Client PCMCIA WLC030

Бренд: Dynalink Страницы: 10

Бренд: Yunlink Страницы: 27

Бренд: Audio Technica Страницы: 33

tm-g5240 - T-mobile Hotspot Wireless

Бренд: T-Mobile Страницы: 95

Бренд: Nortel Страницы: 68

Cinterion ENS22-E

Бренд: Gemalto Страницы: 189

Бренд: Zadako Страницы: 30

Бренд: Hughes Страницы: 32

Бренд: Xirrus Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды