Stereo Line In 1U System Manual
System Overview
Use the Stereo Line In 1U system to bring external audio into your modular system for
processing. The system works with balanced +4 dBu professional audio products and with
-10dbV unbalanced gear.
The Stereo Line In 1U system comprises two components:
1. The
Stereo Line In 1U
module:
A ribbon cable connects this module to either the
Stereo In
Jacks 1U
module, or to a compatible Intellijel case with built-in
¼” jacks. It has independent gain controls for the left and right
channels, along with signal level LEDs. It contains all the gain
control circuitry to drive a eurorack system at the proper levels,
and features two ⅛” output jacks for patching your external
signal into other eurorack modules.
2. Either a
Stereo In Jacks 1U
module, or a case with built-in ¼” audio jacks, such as
Intellijel’s
Palette
or
7U cases
(with a 2nd generation
Audio Jacks board
):
Stereo In Jacks 1U Module
If you don’t own an Intellijel case with built-in compatible ¼”
jacks, then you need to purchase a
Stereo In Jacks 1U
module,
which connects via ribbon cable to the
Stereo Line In 1U
module to provide the ¼” TRS input jacks necessary for
connecting external audio sources.
Palette Case
If you own an Intellijel Palette case, you can connect the
Stereo
Line In 1U
module directly to its built-in pair of ¼” jacks, rather
than purchasing a
Stereo In Jacks 1U
.
7U Case w/ 2nd Generation Audio Jacks Board
If you own an Intellijel 7U case with a 2nd generation
Audio
Jacks Board
(distinguished by the row of shrouded headers
along its bottom edge), you can use its jacks rather than
purchasing a
Stereo In Jacks 1U
module.
If your 7U case has a
1st generation Audio Jacks Board
, you
can purchase a
2nd generation
board to replace your old
board.
Page 3