Connecting the Pedal I/O to a Pedal I/O Jacks 1U Module
The
Pedal I/O 1U
module ships
with a 3-wire link cable. Use this
to connect the
Pedal I/O
to either
a
Pedal I/O Jacks
module or to a
compatible case with built in ¼”
jacks.
If you purchased the
Pedal I/O Jacks
module, simply
connect it to the
Pedal I/O
module with the link cable as
shown to the right.
The connectors are keyed, so
you can orient them only one way — ensuring that you can’t connect the cable backwards. The
Pedal I/O Jacks
does not require power, and the link cable is long enough that the two modules
don’t have to be installed side-by-side if you don’t wish.
NOTE: Never use the 3-wire link cable to connect a Pedal I/O module to an Intellijel Mixup module.
Although both modules use this same cable/connector — they serve different purposes and carry
different signals.
Pedal IO 1U System Manual
