[F]
PEDAL/LINE
level switch - Sets whether
the signal levels sent to the external
device are driving a guitar PEDAL, or
LINE level, pro audio gear.
NOTE: This switch was added on
Version 2, and is not on Version 1 of the
Pedal I/O 1U.
Inputs & Outputs
[1]
IN
- Connect the audio signal you want
processed by your external pedals to the
IN
jack. Modular-level audio arriving at
this jack is converted to the appropriate
signal level (switchable between
“line-level” or “pedal-level”, if using a v2
Pedal I/O
) and impedance-matched
before it’s sent to either the
Pedal I/O Jacks’
SEND jack or to the ¼”
OUT jack on a compatible case.
[2]
MIX
- Any audio that’s returned from your
FX pedals is converted back to modular-level and impedance-matched prior to appearing here
at the
MIX
jack. If you plug a guitar or other instrument into the
Pedal I/O Jacks’
RETURN jack
(or into a ¼” IN jack on a compatible case), then the modular-level and impedance-matched
signal from that instrument appears at the
MIX
jack.
Pedal IO 1U System Manual
