µJack Manual
Front Panel
Controls
1. HEADPHONE Level
The large knob on the top of the µJack controls the level of the
headphone output.
2. MONO/STEREO Switch
This switch controls whether or not the output of the module is
mono or stereo. In mono mode (switch is to the left), the
LEFT
and
RIGHT
inputs are summed internally. In this case both the
L
and
R
outputs, as well as both channels of the headphone jack,
output the same signal.
3. LEFT Attenuator
This knob attenuates the level of the
LEFT
input. The signal is
unmodified when the knob is fully clockwise, otherwise the level is
reduced proportionally.
4. RIGHT Attenuator
This knob functions just as the
LEFT Attenuator
but for the
RIGHT audio channel.
Inputs & Outputs
A.
LEFT Input
Any eurorack-level audio sent to this jack will be scaled down to
+4 dBu levels and sent out the
L Out
jack. Use the
LEFT
Attenuator
to further reduce the signal level.
B.
RIGHT Input
Any eurorack-level audio sent to this jack will be scaled down to +4 dBu levels and sent
out the
R Out
jack. Use the
RIGHT Attenuator
to further reduce the signal level.
NOTE: The
LEFT Input
jack is normalled to the
RIGHT Input
jack, so if nothing is
connected to the
RIGHT Input
jack, then one signal fed into the
LEFT Input
jack will
feed both of the ¼” output jacks.
Page 6
