Quadra & Expander Manual
6. ENV 2 Or Amount Attenuator
- Sets the level of
ENV 2
into
OR 1+2
.
7. ENV 3 Or Amount Attenuator
- Sets the level of
ENV3
into
OR 3+4
.
8. OR 1+2 LED
- Shows the state of the function generator amplitude for
OR 1+2.
9. OR 3+4 LED
- Shows the state of the function generator amplitude for
OR 3+4
.
Inputs and Outputs
A. EOC
– Outputs a high gate signal when the function generator has completed its Decay
phase. The associated yellow LED
[3]
indicates when the respective function generator
has reached the end of its cycle.
B. Attack CV Input
- Allows an input signal to modulate attack time. This input is normalled
to
Decay CV Input
[C]
, allowing both to be controlled together or separately via CV.
C. Decay CV Input
- Allows an input signal to modulate decay time.
D. OR 1+2 Output
- This is the mixed
OR
signal of
1+2
. When using
QUAD 1+2
mode use
this output for complex function shapes. See
ADSR Envelope Generation Using the OR
Outs
and
Quadrature Mode
more information.
E. OR 3+4 Output
- This is the
OR
mixed signal of
3+4
. When using
QUAD 3+4
mode use
this output for complex function shapes.
Page 9
