Side View
Wall
box
for Flush mounting
Fingerprint
window
Rain
Cover
for Surface installation
Surface mount version
93 mm
182 mm
30 mm
Flush mount version
220 mm
120 mm
Camera Lens
Speaker
Call Button
Microphone
Night Light
Screws for panel
mounting
Camera Lens
Speaker
LED 2
Call Button
Microphone
Night Light
LED 1
KEY 2
Location
KEY 1
Location
LED 2
LED 1
KEY 2
Location
KEY 1
Location
Fingerprint
window
Parts and Functions
-1-
Introduction
This door station is equipped with a high resolution colour
ARS
camera sensor
with resolution 500TV Lines
,
with a wide angle of view 105 degrees. White LEDs enable the door station to work efficiently at night. The
door station facia is made of stainless steel. There are both surface mount and flush mount versions.
Door station is equipped with built-in Fingerprint Reader for up to 200 users
.
Door station can be connected to one electric gate/lock by default or to two
locks
with an additional DT-RLC
Lock Interface
Key1 and Key2 location
(see drawing above)
Key1 and Key2 are used for programming, so it is important to understand how to activate them
because they are invisible and located
on the bottom edge of the
Fingerprint cover.
For security
purposes, they are not marked by a visible mark or symbol.
They only can be activated in first 10
seconds after
the
door station
is
powered up.
To activate, p
lace your left t
h
umb on the surface of the
cover to activate Key1
(
use
your
right t
h
umb to activate Key2
)
. Make sure that
a
t
h
umb is
rest
ing flat
on
the surface