-8-
Door Station
Address/ID
Setup
1)Power-on
2)
within 10 seconds
Press and
hold "KEY2" for 3 seconds,
to
enter
Programming Mode
LED 1 Buzzer
beep,beep
(red,flash
ing
)
Press and hold "KEY1" and
"KEY2" for 3 seconds at the
same time
LED 1 Buzzer
beep, beep
(off)
Up to 4 x Door Stations can be connected to one system. In case if multiple Door Stations connected,
they have to be assigned with unique Address/ID.
First
Door Station Address/ID would be
0
(default)
S
econd
Door Station Address/ID would be
1
Thir
d
Door Station Address/ID would be
2
F
o
rth
Door Station Address/ID would be
3
Followed by pressing the "KEY2"
button, each time you press
KEY2 to replace the ID;
Note:The ID will cycle between
ID0
ID1
ID2
ID3.
LED 1 Buzzer
beep one
(green,flash one)
ID0:
beep twice
ID1:
beep 3 times
ID2:
beep 4 times
ID3:
(green,flash twice)
(green,flash 3 times)
(green,flash 4 times)
Note:
any operation
must be done
within 10
s
econds
of door station power
ing
up
Note:
If there is no activity within 10seconds, system will exit Programming mode