Pag.8
www.intelligenthanddryers.com
Dryflow® Vapordri Hand Dryer
4. OPERATION
4.1 Drying
To switch the hand dryer on it must be connected to the power supply and the internal illuminated
switch must be ON.
NOTICE: When the device is delivered the internal switch is ON, so it is not necessary to remove the
front cover to activate it.
When hand dryer is switched on, it automatically carries out an internal check; after some seconds it
will be ready to use.
The right way to use the hand dryer is by introducing vertically both hands, separated, so that they
can be correctly detected by IR sensors.
When motor starts, countdown will be shown on the display of the device, which is similar to a
barcode. The optimal drying time would be one cycle of the barcode display. However if the user
wishes to continue with the drying, another cycle will start automatically without being necessary to
remove hands and introduce them again. Maximum drying time is 30 seconds.
Hand dryer automatically switches off when removing hands.
1 2 3 4
If blinking means
problems with IR and / or end of cycle
30 seconds
Alarms
Duraon of drying cycle
