DETAILS DISPLAYED ON LCD
BATTERY LEVEL INDICATOR :
The battery level is showing by percentage of battery.
charge corresponding to the number of bars and percentage displayed. The
segments in the battery level correspond to the current state of charge, 0-10% one
segment, 11-20% two segments, 21-30% three segments, 31-40% four segments,
41-50% five segments, 51-60% six segments, and so on, all ten are lit when
charge level is above 91%.
Provides the user live telemetry data on time to completely charge, or deplete the
battery based upon the energy entering or leaving the battery.
Highly recommend to fully charge intelligentenergy M1000 when first use. Higher battery
level indicator show, more precise data will indicate.
PLEASE BE AWARE that this value can adjust multiple times as the energy draw
changes from the connected devices. This is evident during initial activation of ports
with a connected device.
RECOMMENDED back to charge the intelligentenergy M1000 when battery indicate
less than 20%. Note that when you first plug in a power source, whether it's a solar
panel or a wall charger, the intelligentenergy M1000 may take a minute to detect
and adjust its charge circuitry before it starts drawing power from the source.
INPUT Status J:
The intelligentenergy M1000 is capable of providing input
energy in watts.
DC Output Status H:
The display will provide output watts of the DC port on position of B.
AC Output Status D:
The display will provide output watts of the AC port on position of B.
The output watts of USB port will display on the LCD Screen B position.
LCD Screen will enter sleep mode after 180 seconds of inactivity (no new output load
detected), and will "wake up" when inputting a charging cord or when any button is
pressed.
7
