Intelligent Energy M1000, Руководство пользователя

Страница: 11 / 16

POWERING / CHARGING DEVICES WITH M1000
Select the type of outlet required by pressing the Output ON/OFF Button ②
④
⑥ . The
output port will NOT function until the appropriate button is pressed to activate the port.
When activated, the indicator on the button will illuminate blue, indicating that the
output(s) are active, and the LCD display will turn on and provide details on the
charging output. The LCD Screen will automatically shut down when no outputs are
activated.
intelligentenergy M1000 will enter sleep mode after 180 seconds of inactivity (no new
output load detected), and will "wake up" when inputting a charging cord or when any
button is pressed. Press the ON/OFF button(s) to shut down the output(s) when not in
use.
PASS-THROUGH CHARGING
The advanced battery management system of the intelligentenergy M1000 allows it to
charge a connected device via DC output & USB output while charge the intelligentenergy
M1000.
DO NOT CONNECTED DEVICE VIA AC OUTPUT WHILE CHARGE THE
intelligentenergy M1000.
OVERLOAD CONDITION
If an overload condition occurs on the OUTPUT port, intelligentenergy M1000 will:
Automatically turn off AC Output power.
The indicator
of LCD Screen will be illuminated.
Do following:
Check the input charge cable. The port will be efficient when the input charge cable meets
the specification outlined in the GENERAL SPECIFICATIONS section.
Only charge intelligentenergy M1000 with provided AC wall power adapter.
M1000 ACCESSORY LIST
18V-23V with Mc4 110V or 230V AC wall plug 12V-14V Car Charger User Manual
connector cable power adapter cable
Recommend to use 150W Solar panel (not included).
9