WARNING
(A) Read all the instructions before using the product.
(B) To reduce the risk of injury, close supervision is necessary when the product is used
near children.
(C) Do not put fingers or hands into the product.
(D) Use of an attachment not recommended or sold by power pack manufacturer may
result in a risk of fire, electric shock, or injury to persons.
(E) To reduce risk of damage to the electric plug and cord, pull the plug rather than the
cord when disconnecting the power pack.
(F) Do not use a battery pack or appliance that is damaged or modified. Damaged or
modified batteries may exhibit unpredictable behavior resulting in fire, explosion or
risk of injury.
(G) Do not operate the power pack with a damaged cord or plug, or a damaged
output cable.
(H) Do not disassemble the power pack, take it to a qualified service person when
service or repair is required. Incorrect reassembly may result in a risk of fire or
electric shock.
( I ) To reduce the risk of electric shock, unplug the power pack form the outlet
before atteMting any instructed servicing.
(J ) WARNING – RISK OF EXPLOSIVE GASES.
(1) WORKING IN VICINITY OF A LEAD ACID BATTERY IS DANGEROUS.
BATTERIES GENERATE EXPLOSIVE GASES DURING NORMAL BATTERY
OPERATION. FOR THIS REASON, IT IS OF THE UTMOST IMORTANCE THAT
YOU FOLLOW THE INSTRUCTIONS EACH TIME YOU USE THE POWER PACK.
(2) To reduce risk of battery explosion, follow these instructions and those
published by battery manufacturer and manufacturer of any equipment you
intend to use in vicinity of the battery. Review cautionary marking on these
products and on engine.
When charging the internal battery, work in a well ventilated area and do
not restrict ventilation in any way.(m) Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.(n) Do not expose a power pack to fire or
excessive temperature.
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
