Contents
1 Safety and warnings
3
1.1
In case of an emergency
1.2 Warning
2 Product specification
4
3 Parts of the FCM-801
5
4 Product interface
6
4.1
Interface specification
5 FCM-801 overview
7
6 Connections
8
6.1
Electrical configuration
6.2
Air supply
6.2
Hydrogen fuel
6.4
Hydrogen connection
6.5
Communication connection
6.6
CAN connection
6.7
Status indication
7 FCM-801 commands and status
11
7.1
Module Enable / Reset
7.2
Module Run
7.3
FCM-801 status
7.4
FCM-801 software states
8 Operation of FCM-801
13
8.1
FCM-801 operation summary
8.2
Anode purge
8.3
Performance Optimisation Cycle
8.4
Standby state
8.5
Fault state
9 Faults
14
9.1
Procedure to reset the fault
10 Installation and set up
15
10.1 Label information
10.2 Mechanical mounting points
10.3 Mechanical protection and covers
10.4 Vibration and shock loads
10.5 Air supply and ventilation
10.6 Hydrogen connection
10.7 Hydrogen fuel physical requirements
11 Trouble-shooting guide
19
11.1 Check for fuel leak
11.2 Fuel check procedure
11.3 Electrical system check procedure
11.4 Stack temperature check procedure
11.5 Filter change procedure
12 Maintenance procedures
23
12.1 User maintenance
12.2 Contact Intelligent Energy Product Support
13 Control parameters
and standard factory setting
24
14 Spare parts, storage and disposal
26
15 EU Declaration of Conformity
27
Disclaimer X
The CE label shows that the product complies with the
basic requirements of the applicable directives. For the
declaration of conformity contact the manufacturer at
[email protected]
