Intelligent Appliance IA-3178-U2i, Руководство пользователя

Страница: 30 / 39

IA-3178-U2i
30
www.intelligent-appliance.com Specifications are subject to change without notice
32-ch Relay
USB or RS-232 Controlled
!aa6dd – Set baud rate
Description
For compatibility with existing devices the IA-3178-U2i can be set to other
standard baud rates.

One must set the device mode register #50 value to ‘82’ to enable setting of
device mode register #51 value.

Make sure setting mode register #50 value to its normal setting when done.
Syntax !aa6dd <CR>
!
Delimiter character
aa Hexadecimal address of the device
6 Change device baud rate command
dd Two characters representing the desired baud rate:
12
1200
24 2400
48 4800
96 9600
19 19200 (default)
38 38400
57 57600
11 115200
<CR> Carriage Return - End of command
Response |dd<CR> if the command was valid
|
Response delimiter
dd New baud rate
<CR> Carriage Return - End of response
Example Command: !00696<CR>
Response: |96<CR>
Change the baud rate of the device at address 00Hex to 9600
1. Mode must be set to “82” first. ( !005082 )
2. Changes will take effect after the next power up. (Power off)
3. Make sure setting the mode back to normal right after changing the
BR.
Note !
Note !