background image

9

INTRODUCTION

Features of Intellian v240C

Automatic Polarization Switching

Intellian v240C antenna automatically changes between linear and circular 
polarization while it does not require manual or physical change.  When a polarization 
is selected from ACU or PC Control Program, the Feed Horn is automatically 
adjusted accordingly, which is patented technology developed by Intellian.

DVB/DVB-S2 and NBD detection capability 

Intellian v240C is capable of detecting DVB-S/DVB-S2 signal, SCPC, and Narrow-
Band signal.  Thanks to its integrated digital tuner and the narrow band detector 
(NBD). 

Wireless communication with the ACU

The ACU of the Intellian v240C offers upgraded functions.  The built-in Wi-Fi 
wireless network card enables the ACU to be wirelessly connected, and it can be 
either turned on and off by a switch. After connecting with Wi-Fi wireless network 
or setting up a network with ACU, it will be easy to monitor, control, and change the 
settings of Intellian antenna system wirelessly using laptops, smartphones, or any 
kind of wireless devices.

Antenna log data and firmware upgrade through USB

The ACU of v240C now automatically stores all action data of Intellian antennas 
onto a built-in memory, and all existing logs are available to be transferred onto 
USB drivers. Also just by plugging in the USB with firmware update files stored, the 
firmware can be automatically updated and upgraded onto the ACU.

Bluetooth module support

When the Intellian supplied Bluetooth module is equipped on a main control unit of 
Intellian antenna, users can access and control the antenna with a laptop that has 
Bluetooth capability. This will lead to easier and more effective ways to setup and 
maintain the system.

Maximized RF performance

The main reflector, Feed-horn and other RF parts are newly designed to maximize 
the antenna performance for maritime application. Not only the gain and Maximum 
Allowed EIRP Density are the highest level amongst the similar-sized VSAT antenna, 
Intellian v240C conforms to various ESV (Earth-Station-on Vessels) standards and 
FCC requirements.

Содержание v240C


















































































































































































Отзывы: