SKYPLAY-DFS Installation Guide
23
This module complies with FCC regulations. Any changes or modifications not expressly approved by the responsible
party could void the user’s authority to operate this equipment.
Notice:
•
This module in its final integration requires the end-product to continue to comply with DFS requirements. A
class II permissive change may be required for operation not already described in the FCC Grant filing.
•
The OEM of final integrator must ensure that FCC labeling requirements are met for a host using this module, if
(1) the module’s FCC ID is not visible when installed in the host, or (2) if the host is marketed so that end users
do not have straightforward commonly used methods for access to remove the module so that the FCC ID of
the module is visible; then an additional permanent label referring to the enclosed module should be used,
with the following contents: Contains TX FCC ID: VSQAMNKHIN1. RX FCC ID: YG7ZRF32200
•
The host OEM user manual must also contain clear instructions on how end users can find and/or access the
module and the FCC ID. The applicable usage is to be used as a wireless device, connected to the back of a
professional camera and transmitting live video, coming from BNC connectors.
•
Only the supplied approved antenna should be used.
•
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in-
stalled and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
FCC and IC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
The antenna used for transmission must be installed to provide a separation distance of at least 20cm from all
persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC Warning
