Intelix
DIGI-VGASD-8X8e
Installation Manual
www.intelix.com
7
5.
Connect the included power cord to the DIGI-VGASD-8X8e.
6.
Connect an RS232 cable to the DIGI-VGASD-8X8e. Verify the opposite
end of the cable is connected to a controller (i.e., PC running Intelix Smart
Control software, touch panel, etc.).
7.
Power-on the DIGI-VGASD-8X8e. Verify that both front panel LEDs are
illuminated. It is normal for the status light to blink.
8.
Power-on the source and destination audio and video devices.
Note:
If controlling the DIGI-VGASD-8X8e matrix with Intelix
Smart Control software, verify the software is properly loaded on a
connected PC.
