Intelix
DIGI-HD-4X8
Installation Manual
www.intelix.com
5
Installation
To install the Intelix DIGI-HD-4X8 matrix switcher, please perform the
following steps.
1.
If mounting in a 19‖ audio/video rack, attach the 19‖ rack ears to the DIGI-
HD-4X8. The DIGI-HD-4X8 requires 2 rack units of spacing. If placing on
a shelf, attach the shelf feet to the DIGI-HD-4X8.
2.
Power-off the source and destination audio and video devices.
Ventilation when Rack Mounting
At least 2 inches of free air space is required on both sides of
the DIGI-HD-4X8 for proper side ventilation.
Ensure there are no closeable doors on the rack that might seal
the DIGI-HD-4X8 from a steady supply of cool air.
Avoid mounting the DIGI-HD-4X8 near a power amplifier or
any other source of significant heat.
It is recommended that you leave an empty rack space above
and below the DIGI-HD-4X8 for additional cooling.
Note:
All connecting audio-visual equipment must be powered off.
