Intelix
DIGI-HD-4X8
Installation Manual
20
www.intelix.com
Using the included USB to serial adapter
The DIGI-HD-4x8 comes with an adapter to use if your computer does not have
a serial port. This is a useful for setup and diagnostic functions.
To Install:
1.
Connect the USB connector to an unused port on your computer.
2.
Allow hardware wizard to install.
3.
Connect the serial connector to the DIGI-HD-4x8.
To determine the COM port this device is using:
1.
(Windows)
Click
on
the
START
menu
Right-click
―My
Computer‖
Select ―Properties‖
2.
Select the ―Hardware‖ tab and click on the ―Device Manager‖ button.
3.
Expand the ―Ports (COM&LPT) section. The COM port number will be
listed next to the device labeled ― USB Serial Port‖
Using 3
rd
-Party Software To Control the Matrix over a LAN
In addition to your web browser, you can also control the matrix using 3
rd
-party
software from companies such as Control4, Lutron, Savant, AMX, Crestron
Electronics, etc.
1.
Follow the steps defined in the
Static IP
section above to assign a fixed IP
address to your unit.
2.
Verify that you are able to control your unit using your web brower as
described above.
3.
The IP commands are the same as the RS232 commands (page 13). All
commands will work except for:
Set IP address
