Intelix
DIGI-HD-4X8
Installation Manual
22
www.intelix.com
4.
All of the remote receive baluns transmit IR commands from the included
remote control, thereby allowing remote control of the matrix itself.
Note:
If the IR codes for a pass-through signal conflict with the
internal IR codes of the matrix, the processing of remote matrix IR
commands may be disabled.
Simultaneously press and hold the
Output 2 Source Select
and
Keylock
buttons for three seconds. A single flash of the front panel
source select LEDs indicates the remote IR commands are enabled. A
double flash of the front panel source select LEDs indicates the
remote IR commands are disabled.
