Intelimax LITE User Manual
V1.1
19
IP Stack Manual Mode
With IPStack manual mode, the modem doesn’t initiate the PPP connection. The
modem will rely on the host on serial port to send the PPP initiation commands.
The AT command to Start the PPP session and open a socket is AT$$IPCTOS.
The AT command to close the socket and PPP session is AT$$IPCTCS. The Intelimax
supports standard $$ commands for IP Stack Manual connections which are detailed in
the section “Extended / Intelimax LITE Specific AT Command Set”.
WAN page allows configuring the following features:
•
Operation mode Serial Modem, IP Stack Auto or IP Stack manual mode
•
APN and dialup string
•
Username and password for IP WAN
•
Auto pin settings (Intelimax LITE will enter the PIN code if SIM pin is Enabled)
•
network authentication information
•
Band
•
Periodic reset
o
TCP Server Listening – if checked will wait until client drops connection
o
TCP Connection State – if checked will wait until Intelimax client drops
connection to a server or server drops connection
•
Battery
o
When ticked, modem will enter idle mode (cellular module and serial
port are switched off) when battery voltage is below 11.9V. Modem will
be back to normal after battery voltage is over 12.3V.
•
Load configuration from an existing file
Invalid PPP password characters list:
“
(double quotation mark)
‘
(quotation mark)
?(question mark)
)(bracket)
@(at sign)
;(semi colon)
|(pipe sign)
I(upper case I)
