Intelimax LITE User Manual
V1.1
17
WAN Configuration
WAN configuration page is used to configure how the modem will connect to the 3G
network. Please select the correct operation mode as this will decide if the modem will
automatically connect to the network on power up (AUTO), be prompted to connect
via AT commands (MANUAL), or work in pass through mode.
The Intelimax LITE supports 3 operating modes:
1.
Serial Modem (Pass through mode – connects to the 3G module in the modem)
2.
IP Stack Auto (Modem connects to the 3G networks and acquires an IP address
and then runs the IP STACK server or client mode)
3.
IP Stack Manual (Modem wait for user to send AT commands before
connecting to the 3G networks and acquiring an IP address.
