10
2. After that, select sensors;
Settings
General
>
Zones
>
Passwords
>
Communication
>
Event codes
>
IP monitoring
>
Ethernet/Wi-Fi
>
GPRS
>
Programed activation/deactivation
>
Sensors
>
Once you have done this, select the sensor you wish to configure, for example:
Sensor 1
Sensors
Sensor 1 >
Sensor 2 >
Sensor 3 >
Sensor 4 >
Sensor 5 >
Sensor 6 >
Sensor 7 >
Sensor 8 >
Sensor 9 >
...Sensor 64 >
After selecting the sensor, the following adjustment screen will open.
Sensor 1
Sensitivity
Level 0 (minimum sensitivity)
Level 1 (normal sensitivity, factory default)
Level 2 (intermediate sensitivity)
Level 3 (maximum sensitivity)
LED
Always Off
On when triggered
Modo de operação
Economy mode
Continuous mode
Discard changes
Save
Note:
for configuring the settings, check the sensitivity table, the explanations of LED operation and the Operation
mode in item 9.2. Information on the sensor settings.
Содержание IVP 8000 EX
Страница 1: ...User guide IVP 8000 EX...
